Installation Instructions for our Euro PlateMate Brackets
Inclusions in Box
STEP 1
Our Brackets come preassembled.
Take the Euro PlateMate and remove the 4 M2 bolts from underneath. This separates the bracket into two pieces - top and bottom.
Step 2
Take the top piece and position it on your bumper. This section has our PlateMate logo on the back and soft rubber stoppers — designed to sit flush against your car and protect your paint.
Use the M6 Bolts or Screws - whichever suits your car's existing holes - to mount it at your desired height.
STEP 3
Next, grab your Euro plate and slide it up into the top bracket. If you’ve got clearance, slot it from underneath. If not, tilt it in sideways and push up firmly into the grooves.
Then, take the bottom component and press it against the lower edge of your plate.
Now comes the fiddly bit — reinstall the four M2 screws underneath to secure the plate in place. It can take a little patience, but it’s worth it for that perfect, flush fit
Watch Full
USEFUL TIPS
We pre-fit a bit of black tac inside the slotted grooves to reduce rattling. If your plate feels tight, just remove a little of that tac — sometimes we pack in a bit extra.
Be careful not to over-tighten the screws
If you have any issues with installation, please don't hesitate to contact us via email or by the contact form below:
sales@theplatebracket.com.au